2011 Silverado pictures

2011 Silverado pictures

Postby HunterG » March 2nd, 2012, 10:45 am

Just finished installing a BlueStar 2010 and thought I would share some pics
Removing the lower dash is all that is required, start with panel below steering wheel (1 10mm bolt and two phillips screws)
Then two 7mm bolts on the center section. Then pull from left side working the clips lose as you go.
I used double sided tape and zip ties to secure the CoStar unit.

Location of OnStar
Image

BlueStar installed
Image
HunterG
 
Posts: 1
Joined: March 2nd, 2012, 10:31 am

Re: 2011 Silverado pictures

Postby mrm13 » June 28th, 2012, 8:01 am

I have a 2010 Silverado with bucket seats and long/big center console, not a bench seat. Does anyone know if the Onstar module is in the same location with that set up? If so, any removal/installation tips?
mrm13
 
Posts: 2
Joined: June 28th, 2012, 7:59 am


Return to Silverado

Who is online

Users browsing this forum: No registered users and 1 guest

cron